Vester SPP x20 Tool Monitoring & Control System

With the new device palette SPP x20 a wide spectrum of demands is fulfilled; for the beginner on tool monitoring as well as for the experienced pro.

The devices are distinguished by a very good relation between price and performance and can be extended with modules from the SPP 120 over the SPP 220 to the SPP 320.

Thanks to this possibilty of extension an optimal safety of investitions is guaranteed - the device purchased once is growing with the rising requests!

General

360° Absolute Encoder
Auto-Set-Tech
Immediate Stop or TDC Stop
2 x 8 digit programmable stroke counters for inspections stop or lot sizes
1 x 12 digit system counter
Automatic Single Stroke Function
Monitoring RPM
Measuring of Sensor Inputs
LCD Display
Tool Setting Mode
Languages: English, German, French, Italian
Access code to ensure programme security
Test Menu
Remote Control

Tool Monitoring

Ejection, feed, tool parallelism, pilot pin etc.
Monitoring of x number of holes per pitch
Monitoring of intermittent blank ejection through the die. 1 signal per x strokes
Monitoring start and finish of feed pitch
4 to 8 sensor inputs PNP 24 VDC

Electronically Adjusted Degree Angle Control Feature

Control feeders, air blast, lubrication systems, electric valves etc.
Each output signal can be triggered by a counter, for example every 10 strokes to operate a scrap chopper or lubricator
3 to 6 output signals PNP 24 VDC 0.5A

Housing Options

The devices SPP x20 are mounted in a very compact box housing. The cable can be mounted alternatively upwards or downwards.

Thanks to the compact box and the eligible cable leaving the devices can be mounted ideally direct onto the press or the trumpet cabine - without needing a cabinet or a rack.

Type	Housing	Part
SPP 120	Box	758-340-2200
SPP 220	Box	758-340-2300
SPP 320	Box	758-340-2400

Technical Data

	*SPP 120*	*SPP 220*	*SPP 320*
Power supply	110 - 240 VAC
Sensor inputs 24VDC PNP	4	4	8
Output signals 24VDC 0.5A PNP	-	3	6
Relay outputs 250VAC / 3A potential free	Immediate Stop, Stop TDC, Start
Dimensions	223 x 241 x 75 mm (W x H x D)
Weight	4.0kg
Color	RAL 1016 yellow

For more information, please visit Vester Homepage: http://www.vester.de

In-Die Sensing Systems