BSTA 280F

Compact fixed stroke. Made by BRUDERER.

The BSTA 280F is a fixed-stroke, high-performance stamping press with full mass balancing. Designed for efficiency, precision and reliability, it offers a choice of five stroke heights and operates at speeds of to up to 1800 spm. Like the BSTA 280, it stands out with its exceptionally compact design which minimizes floor space requirements.

BSTA 280F

Contact
Key Figures
  • Tool loading area

    750 - 880 mm

  • Stroke rate

    100 - 1800 spm

  • Press force

    280 kN

Technical dataBSTA 280F
BSTA 280F-88
Press control
B2 / B3
Nominal force
kN
280
Fixed stroke
mm
12.7/ 15.9/ 19/ 25.4/ 31.8
Stroke rate
spm
100 - 1800F)
Compressed air connection R ½"
bar
7 - 10
Mains voltage
V
400A)
Mains frequency
Hz
50 / 60
Connected load BSTA
 
kVA
55B)
Drive power main motor B2
kW
22A)
Drive power main motor B3
kW
22A)
Strip run-in height
mm
50 - 120
Strip inlet width BSTA
Max.
mm
230
Tool loading opening
Width
mm
880
Ram adjustment
mm
51
Shut height(according to stroke)
mm
178.5 - 239
Bolster plate area
WidthDepthHeight
mmmmmm
8705361154C)
Ram area
WidthDepth
mmmm
776360
Base plate opening
WidthDepth
mmmm
830180
Dimensions
BSTA 280F-88
Punching press
Width
mm
2067
-Fixed stroke
DepthHeightWeight (app.)
mmmmkg
116627045300
Feed Units
BSV 75BSV 75TBSV 170
BBV 191BZV 61
A) Options on request
B) Without peripheral equipment
C) Above floor level
F) Fixed stroke BSTA with 2000 spm as an option
Subject to change without notice
Technical data

Select the language for your download.

Automation and optionsUnlock your full potential.

Feed systems

The feeders developed by BRUDERER enable maximum precision even in complex manufacturing processes. Mechanically or electrically driven, the models are suitable for a wide variety of raw materials.

BSA servo axles

More possibilities. More flexibility. More space. Greater process reliability. We will be pleased to advise you on your customised solution with BRUDERER servo axis technology.

B3 Control

With the B3 control system, BRUDERER is setting a new benchmark in the automation of high-performance stamping processes.

BSP lamination stacking control

Process automation for rotor and stator lamination stack production with the BRUDERER BSP lamination stacking control. Fully integrated into the B3 control system, it enables seamless operation, reliable process monitoring and precise synchronisation of all process steps.
Overview