BSTL 350

Reduced to the max.Made by BRUDERER.

The BSTL 350 is a high-performance fixed-stroke automatic stamping press designed for cost-effective, high-precision production of small and micro parts in large volumes. With a nominal force of 350 kN and a tool loading area of 880 mm, is particularly well suited for electronics industry applications. Achieving stroke rates up to 1200 spm, the BSTL 350 delivers outstanding productivity. The choice of stroke height ensures maximum efficiency, while press force monitoring and advanced drive technology provide high process reliability and energy-efficient operation.

BSTL 350

Contact
Key Figures
  • Tool loading area

    880 mm

  • Stroke rate

    100 - 1200 spm

  • Press force

    350 kN

Technical dataBSTL 350
BSTL 350-88
Press control
B3
Nominal force
kN
350
Fixed stroke
mm
15.9/ 19/ 25.4/ 31.8
Stroke rate
spm
100 - 1200
Compressed air connection R ½"
bar
6 - 10
Mains voltage
V
400A)
Mains frequency
Hz
50 / 60
Connected load BSTL
kVA
37
Drive power of main motor
kW
15
Strip run-in height
mm
80 - 150
Strip inlet width BSTL
Max.
mm
230
Tool loading opening
Width
mm
880
Ram adjustment
mm
51
Shut height(according to stroke)
mm
228.6 - 287.6
Bolster plate area
WidthDepthHeight
mmmmmm
8705361154C)
Ram area
WidthDepth
mmmm
776360
Base plate opening
WidthDepth
mmmm
830180
Dimensions
BSTL 350-88
Punching press
Width
mm
2007
-Fixed stroke
DepthHeightWeight (app.)
mmmmkg
112528215650
Feed Units
BSV 120L
A) Options on request
C) Above floor level
Subject to change without notice
Technical data

Select the language for your download.

Automation and optionsUnlock your full potential.

Feed systems

The feeders developed by BRUDERER enable maximum precision even in complex manufacturing processes. Mechanically or electrically driven, the models are suitable for a wide variety of raw materials.

B3 Control

With the B3 control system, BRUDERER is setting a new benchmark in the automation of high-performance stamping processes.

BSP lamination stacking control

Process automation for rotor and stator lamination stack production with the BRUDERER BSP lamination stacking control. Fully integrated into the B3 control system, it enables seamless operation, reliable process monitoring and precise synchronisation of all process steps.
Overview