BSTL 610

Reduced to the max.Made by BRUDERER.

The BSTL 610 is a high-performance fixed-stroke stamping press designed for the cost-effective production of high-volume series. With a nominal force of 610 kN and a tool installation opening of 1500 mm, it is ideally suited for applications in the AI and electronics industries. Stroke rates of up to 850 spm, selectable fixed stroke lengths, as well as advanced drive and press force monitoring systems ensure maximum productivity, high process reliability and high energy efficiency.

BSTL 610

Contact
Key Figures
  • Tool loading opening

    1500 mm

  • Stroke rate

    100 - 850 min⁻¹

  • Nominal force

    610 kN

Technical dataBSTL 610
BSTL 610-150
Press control
B3
Nominal force
kN
610
Fixed stroke
mm
19/ 25.4/ 31.8/ 38/ 50.8
Stroke rate
spm
100 - 850
Compressed air connection R ½"
bar
7 - 10
Mains voltage
V
400A)
Mains frequency
Hz
50 / 60
Connected load BSTL
kVA
41
Drive power of main motor
kW
15
Strip run-in height
mm
100-180
Strip inlet width BSTL
Max.
mm
340
Tool loading opening
Width
mm
1500
Ram adjustment
mm
64
Shut height(according to stroke)
mm
262.6 - 342.5
Bolster plate area
WidthDepthHeight
mmmmmm
14907401250C)
Ram area
WidthDepth
mmmm
1390420
Base plate opening
WidthDepth
mmmm
1410200
Dimensions
BSTL 610-150
Punching press
Width
mm
2677
-Fixed stroke
DepthHeightWeight (app.)
mmmmkg
1342340211150
Feed Units
BSV 250L
A) Options on request
C) Above floor level
Subject to change without notice
Technical data

Select the language for your download.

Automation and optionsUnlock your full potential.

Feed systems

The feeders developed by BRUDERER enable maximum precision even in complex manufacturing processes. Mechanically or electrically driven, the models are suitable for a wide variety of raw materials.

B3 Control

With the B3 control system, BRUDERER is setting a new benchmark in the automation of high-performance stamping processes.

BSP lamination stacking control

Process automation for rotor and stator lamination stack production with the BRUDERER BSP lamination stacking control. Fully integrated into the B3 control system, it enables seamless operation, reliable process monitoring and precise synchronisation of all process steps.
Overview