BSTL 610

Reduced to the max.Made by BRUDERER.

The BSTL 610 is a high-performance fixed-stroke automatic stamping press designed for cost-effective, high-precision production of small and micro parts in large volumes. With a nominal force of 610 kN and a tool loading area of 1500 mm, is particularly well suited for electronics industry applications. Achieving stroke rates up to 850 spm, the BSTL 610 delivers outstanding productivity. The choice of stroke height ensures maximum efficiency, while press force monitoring and advanced drive technology provide high process reliability and energy-efficient operation.

BSTL 610

Contact
Key Figures
  • Tool loading opening

    1500 mm

  • Stroke rate

    100 - 850 min⁻¹

  • Nominal force

    610 kN

Technical dataBSTL 610
BSTL 610-150
Press control
B3
Nominal force
kN
610
Fixed stroke
mm
19/ 25.4/ 31.8/ 38/ 50.8
Stroke rate
spm
100 - 850
Compressed air connection R ½"
bar
7 - 10
Mains voltage
V
400A)
Mains frequency
Hz
50 / 60
Connected load BSTL
kVA
41
Drive power of main motor
kW
15
Strip run-in height
mm
100-180
Strip inlet width BSTL
Max.
mm
340
Tool loading opening
L-R
mm
1500
Ram adjustment
mm
64
Shut height(according to stroke)
mm
262.6 - 342.5
Bolster plate area
L-RF-BHeight
mmmmmm
14907401250C)
Ram area
L-RF-B
mmmm
1390420
Base plate opening
L-RF-B
mmmm
1410200
Dimensions
BSTL 610-150
Punching press
L-R
mm
2677
-Fixed stroke
F-BHeightWeight (app.)
mmmmkg
1342340211150
Feed Units
BSV 250L
A) Options on request
C) Above floor level
Subject to change without notice
Technical data

Select the language for your download.

Automation and optionsUnlock your full potential.

Feed systems

The feeders developed by BRUDERER enable maximum precision even in complex manufacturing processes. Mechanically or electrically driven, the models are suitable for a wide variety of raw materials.

B3 Control

With the B3 control system, BRUDERER is setting a new benchmark in the automation of high-performance stamping processes.

BSP lamination stacking control

Process automation for rotor and stator lamination stack production with the BRUDERER BSP lamination stacking control. Fully integrated into the B3 control system, it enables seamless operation, reliable process monitoring and precise synchronisation of all process steps.
Overview